Powerful Permanent Magnetic Filter Stainless Steel Neodymium Filter Magnets
Grate Magnets are placed directly in the product stream allowing free flowing products to come in direct contact with the grate. Grate Magnets are typically constructed with one inch diameter magnetic tubes mounted on two inch centers in a frame. The length and width can be fabricated to any dimension, usually in two inch increments.
Grate Magnets offer excellent protection from metal contamination. As product flows over the magnetic tubes, captured metal contaminants are pushed to the underside of the tube where they are now out of contact with the product flow preventing wash off back in to the clean material.
Cleaning is achieved by removing the Grate Magnet and wiping the magnetic tubes clean. It is important to keep in mind that by placing a Grate Magnet in the product flow, you will be reducing fifty percent of your flow through area. Grate Magnets should be sized so they do not impede the flow of product.
Magnetically engineered to provide a full range of ferrous metal separation from free-flowing products with gravity fall processing applications. Puritan's designs offer maximum capture, control and protection of equipment while improving product purity. For maximum protection, locate in critical areas where capture is possible, most needed, and where removal for cleaning is feasible. Grates are most effective when the product is dry, free flowing and does not bridge between the magnetic tubes (Puritan also offers other magnetic designs for those more difficult applications). Select a Magnetic Grate at least twice the cross sectional area of the incoming spout opening and discharge. When in doubt, phone Puritan for engineering assistance.
Construction
• Highest grade of magnet material including Neodymium-Iron-Boron (rare earth), Samarium-Cobalt (rare earth), Ceramic and Alnico
• 1/8" thick x 2" tall stainless steel support stringers welded to tubes
• Rugged, high strength designs
• Seam welded tube ends (Finish Specifications)
• 100% stainless steel enclosed construction
Options
• 316L stainless steel and other alloy construction
• Special sizes on request
• Round sizes available
• Non-standard tube spacing
| Magnetic Filters |
| Size |
D12/D16/D19/D22/D25/D25.4/D28/D32mm |
| Surface gauss |
3000gauss-12000gauss |
| Sample |
Avalible |
| Lead time |
20 days |
Product Show
Packaging
Standard export package for air and sea shipping.
usually inner carton -→ outer box (single layer and double layer) -→ pallet and can be packaged per your requests.
+By Air: all the magnetic should be degaussed and we will use Iron sheet to shield.
+By Sea: we will place a pallet on the bottom of cartons.
Shipping
Express (TNT, DHL, FedEx, UPS, etc), Air, Ocean.
a: The weight is under 40Kgs, we recommend to send them in shielding boxes to you by Express.
b: The weight is between 40Kgs-100Kgs, it can be sent by Express or Air.
c: The weight is over 100Kgs, we recommend to send them by Ocean.
Notice to Buyers
In order to effectively provide you with high-quality magnetic products and quote you the best price, we need to know the following information before you place an order: 1) Material? Grade? Shape? Size? Tolerance? Order quantity? 2) Surface treatment? Zinc plated? Nickel plated? Ni-Cu-Ni plated? 3) Is it magnetized? If magnetized, what is the magnetization direction? 4) The maximum temperature of the working environment of the magnet? 5) Please let us know if you have any question or request.
